Skoda Octavia III 2013 Workshop Manual page 227

❑ pushed into the fuel tank
❑ do not kink
❑ disconnect and connect
12 - Fuel tank
❑ Removing and installing
13 - Screw
❑ Replace after disassembly
❑ 20 Nm + torque a further 90° (
14 - Nut
❑ for heat shield
❑ 2 Nm
15 - Heat shield
❑ for fuel tank
16 - Tensioning strap
❑ Check fitting position
17 - Screws
❑ Replace after disassembly
❑ 20 Nm + torque a further 90° (
Earth connection for fuel filler neck
– Connect earth connection as shown in the illustration.
– Ensure proper seating of plug connection.
♦ Plug -2- of the earth connection on the threaded ring -3- of the
fuel filler neck.
– Unhook contact peg -1- of the earth connection in the securing
bore on the fuel tank -4- and press in the distance sleeve -5-.
WARNING
Risk of explosion from electrostatic charge.
♦ After installing, use an ohmmeter to test the electrical con‐
nection of the plate ring on the fuel filler neck at a bare
point on the body.
♦ Specified value approximately 0 Ω
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
⇒ page 250
⇒ page 222
1
/ 4 turn)
1
/ 4 turn)
Octavia III 2013 ➤ , Octavia III 2014 ➤
219
1. Fuel tank