Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– I. Turn exhaust camshaft with assembly tool - T40266- in
-direction of arrow A- and push camshaft clamp - T40271/1-
out of the serration of the chain sprocket in
-direction of arrow B- .
– II. Relieve the load on the camshaft until the timing chain rests
against the sliding rail -1-, hold the camshaft in this position,
fit the tensioning rail -2- and tighten the screw -3-.
– Install tensioner -1- and tighten screws -arrows-.
– Install chain tensioner -2-. Tighten screw -1- and remove rig
pin - T40011- .
– Turn inlet camshaft with assembly tool - T40266- in
-direction of arrow 1- and move camshaft clamp - T40271/2-
out of the teething of the chain sprocket in
-direction of arrow 2- and release the camshaft.
– Remove camshaft clamp - T40271/1- and camshaft clamp -
T40271/2- .
100
Rep. gr.15 - Cylinder head, valve gear