Skoda Octavia III 2013 Workshop Manual page 37

Component
Screws and nuts
♦ Assembly bracket ⇒ page 35
♦ Securing gearbox to engine⇒ Gearbox; Rep. gr. 34 .
Work procedure
Note
Replace screws which have been tightened firmly to a torquing
♦
angle.
Replace self-locking nuts and gasket rings, gaskets and O-
♦
rings.
Hose connections as well as charge air pipes and -hoses must
♦
be free of oil and grease before being installed.
Secure all hose connections with hose clamps which comply
♦
with the series design ⇒ ETKA - Electronic Catalogue of Orig‐
inal Parts .
All cable straps should be fitted on again in the same place
♦
when installing.
– Installing intermediate plate
Note
A vehicle with automatic transmission is shown as an example.
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
Nm
M6 10
M7 15
M8 20
M10 40
M12 65
.
⇒ page 56 .
Octavia III 2013 ➤ , Octavia III 2014 ➤
2. Removing and installing engine
29