Removing And Installing Oil Sump Bottom Part; Removing And Installing Oil Pump - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
1.3 Removing and installing oil sump bot‐
tom part
Removing
• Engine oil is drained ⇒ Maintenance ; Booklet Octavia III
– Remove oil level and oil temperature sender - G266-
⇒ page 159 .
– Unscrew screws -20...1-.
– Remove lower part of oil sump.
Install
– Install lower part of the oil pan.
– Screw in new screws -1...20-.
Lower part of the oil pan- tightening sequence
– Tighten new screws -1 to 20- and tighten in 2 stages in the
sequence as shown:
1. Tighten screws to 8 Nm.
2.
90° (torque a further 90° (
– Installing oil level and oil temperature sender - G266-
⇒ page 159 .
– Fill with engine oil and check the oil level ⇒ Maintenance ;
Booklet Octavia III .
1.4

Removing and installing oil pump

Special tools and workshop equipment required
♦ Assembly tool - T10118-
♦ Rig tool - T40265-
Removing
– Remove oil sump bottom part
– Unscrew screw -1- and pull off baffle -2-.
160
Rep. gr.17 - Lubrication
1
/ 4 turn).
⇒ page 160 .