Removing And Installing The Camshaft Timing Shaft - Skoda Octavia III 2013 Workshop Manual

9 - Camshaft housing
10 - Camshaft timing shaft
❑ mark direction of rotation in colour before removing
❑ Removing and installing
11 - Sliding rail
❑ for camshaft timing shaft
❑ multiple versions - pay attention to part number ⇒ ETKA - Electronic Catalogue of Original Parts
12 - Guide bolt
❑ 20 Nm
13 - Three-stage chain sprocket
❑ at the crankshaft
❑ Fitting position ⇒ page 91
Chain sprocket to crankshaft - fitting position
• The two areas -arrows- must face each other.
2.2 Removing and installing the camshaft
timing shaft
Special tools and workshop equipment required
♦ Assembly device - T10352/2-
♦ Rig pin - T40011-
♦ Rig tool - T40267-
♦ Counterholder - T10355-
♦ Camshaft clamp - T40271-
♦ Assembly lever - T40243-
♦ Assembly tool - T40266-
♦ Assembly tool - T10531-
Removing
– Remove top cover for timing chain
– Remove the sound dampening system ⇒ Body Work; Rep.
gr. 66 .
Caution
The control valves have a left-hand thread.
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
⇒ page 91
⇒ page 82 .
Octavia III 2013 ➤ , Octavia III 2014 ➤
91
2. Chain drive