Skoda Octavia III 2013 Workshop Manual page 318

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
Work procedure:
– Remove engine cover
WARNING
The fuel system is under pressure! Before opening the system,
you must remove the pressure in the high-pressure system
⇒ page 3 .
– Remove fuel pressure sender - G247-
– Instead of the fuel pressure sender - G247- insert the adapter
- VAS 6394/2- and fix it with the tightening torque of the fuel
pressure sender - G247- .
• Tightening torque
⇒ "4.1 Fuel distributor FSI- summary of components",
page 298
– Open the screw plug -2- of the digital pressure manometer -
VAS 6394/1- and fix the removed fuel pressure sender - G247-
with the tightening torque.
– Use the test adapter - VAS 5570- in order to establish the
electrical connection between the vehicle and the fuel pres‐
sure sender - G247- .
– Connect vehicle diagnosis tester ⇒ Vehicle diagnostic tester.
– Switch on ignition.
– Select self-diagnosis "engine electronics".
– Then select "measured values".
– In the function menu, select the "Fuel pressure".
The actual value which is transmitted to the engine control unit by
the fuel pressure sender - G247- is shown in the display field.
310
Rep. gr.24 - Mixture preparation - injection
⇒ page 10 .
⇒ page 308 .