Skoda Octavia III 2013 Workshop Manual page 27

– Disconnect the plug -1- at the AC compressor regulating valve
- N280- .
WARNING
Risk of damaging AC compressor, refrigerant lines and hoses.
♦ Do not over-tension, buckle or bend refrigerant lines and
hoses.
– Remove bolts -arrows-.
WARNING
Risk of injury through refrigerant.
♦ Do not open the refrigerant circuit of the air conditioning
system.
– Remove AC compressor with connected refrigerant hoses
from the holder and strap up to the right side.
– Unscrew the right and left drive shaft -arrow- from the gearbox
⇒ Suspension; Rep. gr. 40 and tie up towards the rear.
Note
Ensure that the surface protection of the cardan shaft is not dam‐
aged.
Vehicles with four-wheel drive
– Release screws -arrows- and remove heat shield -1-.
– To reinstall, mark the position of the flexible disk and the angle
gearbox flange to each other.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
2. Removing and installing engine
19