Skoda Octavia III 2013 Workshop Manual page 136

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– Affix camshaft clamp - T40271/2- to cylinder head and move
into the serration of the chain sprocket in
-direction of arrow 2-; where necessary, rotate the inlet cam‐
shaft with assembly tool - T40266- in -direction of arrow 1-.
– Undo the screw -1- and move the tensioning rail -2- down‐
wards.
– Screw camshaft clamp - T40271/1- to cylinder head.
– Turn exhaust camshaft with assembly tool - T40266- in
-direction of arrow 1- and move camshaft clamp - T40271/1-
into the teething of the chain sprocket in
-direction of arrow 2-.
– Using a waterproof felt-tip pen, mark the chain sprockets
around the pegs of the camshaft clamp - T40271/1- and cam‐
shaft clamp - T40271/2- -arrow-.
– Remove top guide rail -1-, unlock the locking mechanism with
a screwdriver, and push the guide rail forwards.
– Remove the camshaft timing shaft from the chain sprockets.
WARNING
Avoid damage to valves and piston crowns.
♦ When the camshaft timing shaft was removed from the
cylinder head, the crankshaft must not be turned further.
128
Rep. gr.15 - Cylinder head, valve gear