Removing And Installing Ribbed Belt Pulley - Skoda Octavia III 2013 Workshop Manual

1.5 Removing and installing ribbed belt pul‐
ley
Special tools and workshop equipment required
♦ Counterholder - T10355-
♦ Assembly tool - T10531-
Note
Fixing screw for vibration damper -A- joins the belt pulley -1-, the
sprocket on the timing belt -2- and the crankshaft -3-. Before re‐
moving the fixing screw, the crankshaft chain sprocket must be
secured as shown.
Removing
– Remove the sound dampening system ⇒ Body Work; Rep.
gr. 50 .
– Remove the front right wheelhouse liner ⇒ Body Work; Rep.
gr. 66 .
– Remove V-ribbed belt
– Remove the locking pin - T10060 A- from the tensioner pulley
for poly V-belts.
– Turn the V-ribbed belt pulley, crankshaft with the counterhold‐
er - T10355- in position "ODT for cylinder 1" -arrow-.
• The notch on the V-ribbed belt pulley must face the arrow
marking on the bottom cover for the timing chain.
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
⇒ page 45 .
Octavia III 2013 ➤ , Octavia III 2014 ➤
1. Cylinder block - Belt pulley side
49