– Unscrew screws -arrows- for gearbox mount -1- after another
and replace (if not already done during engine installation).
– Firstly, loosely insert the screws.
– Make sure that on the gearbox side the edges of the support‐
ing arm and gearbox mount are parallel.
•
Distance -x- = distance -x-.
– Tighten gearbox mount screws.
Installation is carried out in the reverse order.
Tightening torques
⇒ page 35
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
43
3. Assembly bracket