Skoda Octavia III 2013 Workshop Manual page 323

⇒ page 316
5 - O-ring
❑ Renew if damaged
6 - Roller tappet
❑ under certain circumstances remain inserted into the vacuum pump after the removal of the high pressure
pump
7 - Connection for fuel feed line
♦ 1.8 l engines: 15 Nm
♦ 2.0 l engines: 20 Nm
8 - Open warm-type clamp
❑ Replace after disassembly
9 - Fuel feed line
❑ for fuel distributor for injection valve MPI
❑ Install free of tension (make sure it is clean)
10 - Connection fittings
❑ the fuel supply line
❑ Replace after disassembly
❑ 40 Nm
11 - Union nut
❑ the fuel supply line
❑ 27 Nm
12 - Fuel feed line
❑ for fuel distributor for injection valve FSI
❑ Wet ball end pieces of the fuel feed line with engine oil
❑ Install fuel feed line free of tension (make sure it is clean)
13 - Screw for high pressure pump
❑ Replace after disassembly
♦ 1.8 l engines: 8 Nm + torque a further 90° (
♦ 2.0 l engines: 20 Nm
14 - Spring strap clamp
❑ Renew if damaged
15 - Fuel feed line
❑ from fuel tank
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
1
/ 4 turn)
315
6. High pressure pump