Skoda Octavia III 2013 Workshop Manual page 145

– Remove the positioning elements for the camshaft adjustment
-arrows-.
– Remove high pressure pump
– Remove vacuum pump ⇒ Suspension; Rep. gr. 47 .
– Remove engine mounts
– Remove the sound dampening system ⇒ Body Work; Rep.
gr. 50 .
– Remove the front right wheelhouse liner ⇒ Body Work; Rep.
gr. 66 .
– Remove engine support
– Remove top cover for timing chain
– Rotate the V-ribbed belt pulley with counterholder - T10355-
into the "TDC" position.
• The notch on the V-ribbed belt pulley and the marking for the
bottom cover for timing chain must be opposite each other
-arrow-
• Markings -1- of the camshaft chain sprocket must lie opposite
to markings -2 and 3- on the cylinder head
– Remove below cover for timing chain
WARNING
The control valves have a left-hand thread.
– Use the assembly device - T10352/2- to remove the left and
right control valve in -direction of arrow-.
– Screw out screws -arrows- and screws arrows and remove
engine cap.
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
⇒ page 316 .
⇒ page 36 .
⇒ page 37 .
⇒ page 82 .
⇒ page 85
Octavia III 2013 ➤ , Octavia III 2014 ➤
.
137
4. Valve gear