Skoda Octavia III 2013 Workshop Manual page 23

– Unscrew nut -arrow-, disconnect and expose electric cable.
Vehicles fitted with a manual gearbox 02S
– Unplug connector -2-.
– Turn back gear lever boot for B+-pin -1- and unscrew B+-line
from magnet switch of the starter.
– Release nuts -3- and remove earth cable.
– Remove front left connector from the transmission:
-1- for Gearbox neutral position sender - G701- .
-2- for Reversing light switches - F4- .
– Remove the clutch- and guide cable from the transmission and
expose ⇒ Gearbox; Rep. gr. 34 .
– Remove slave cylinder ⇒ Gearbox; Rep. gr. 30 .
Caution
Risk of damaging the slave cylinder.
After removing the slave cylinder with connected tube-hose
line, no longer press the clutch pedal.
Vehicles with automatic gearbox 0CW
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
2. Removing and installing engine
15