Skoda Octavia III 2013 Workshop Manual page 154

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– Remove extractor - T40267- .
– Tighten screws for bearing cap -arrows-.
– Install chain tensioner -2-. Tighten screw -1- and remove rig
pin - T40011- .
– Check the setting; the coloured chain links -arrows- must be
located at the markings of the chain sprockets.
– Install the control valves -Pos. 6-
– Turn the crankshaft twice in the running direction of the engine.
Note
Depending on the gear ratio, after turning the engine, the coloured
chain links must not be at the marks on the chain sprockets.
146
Rep. gr.15 - Cylinder head, valve gear
⇒ page 90 .