Middle Or Rear Part Of The Exhaust System - Summary Of Components - Skoda Octavia III 2013 Workshop Manual

1 - Open warm-type clamp
❑ align exhaust system
free of stress before
tightening ⇒ page 339
❑ Tighten bolted connec‐
tions evenly
❑ 23 Nm
2 - Rear part of exhaust system
❑ for first equipment build‐
ing unit with middle part
of exhaust gas system,
replace individually
when carrying out re‐
pairs
❑ The separation point is
marked by indentations
on the exhaust pipe
❑ fitting on the exhaust
system free of stress
⇒ page 339
3 - Support
4 - Retaining strap
❑ Renew if damaged
5 - Support
6 - Screw
❑ 20 Nm
7 - Retaining strap
❑ Renew if damaged
8 - Support
9 - Rear tunnel bridge
❑ Removing and installing
⇒ Body Work; Rep. gr.
66
10 - Nut
❑ 55 Nm
11 - Middle part of exhaust system
❑ for first equipment building unit with rear part of exhaust gas system, replace individually when carrying
out repairs
❑ The separation point is marked by indentations on the exhaust pipe
❑ fitting on the exhaust system free of stress
1.4 Middle or rear part of the exhaust sys‐
tem - Summary of components
For vehicles with front-wheel drive and engine identification char‐
acters CHHB
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
⇒ page 339
1. Removing and installing parts of the exhaust system
333