Skoda Octavia III 2013 Workshop Manual page 239

1 - Fuel delivery unit
❑ with fuel system pres‐
surisation pump -G6-
❑ with integrated fuel filter,
the fuel filter cannot be
replaced individually
❑ Checking fuel pump
electrics ⇒ Vehicle diag‐
nostic tester
❑ Removing and installing
⇒ page 233
❑ Fill the vehicle with at
least 5 litres of fuel after
installing
2 - Sealing ring
❑ Replace after disas‐
sembly
❑ install when dry
3 - Lock ring
❑ loosen and/or tighten
using wrench - T30101
(3087)-
❑ 110 Nm
4 - Fuel pump control unit -
J538-
❑ Removing and installing
⇒ page 248
❑ Checking fuel pump
electrics ⇒ Vehicle diag‐
nostic tester
5 - Connector
❑ For fuel pump control
unit - J538-
❑ Ensure safe locking by pulling
6 - Connector
❑ for fuel system pressurisation pump - G6- and fuel gauge sender - G-
❑ Ensure safe locking by pulling
7 - Fuel feed line
❑ to the engine
❑ do not kink
❑ disconnect and connect
8 - Fuel gauge sender - G-
❑ carry out an electrical check on the fuel pump control unit - J538- ⇒ Vehicle diagnostic tester
❑ Removing and installing
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
⇒ page 250
⇒ page 240
Octavia III 2013 ➤ , Octavia III 2014 ➤
231
1. Fuel tank