Fuel Distributor Mpi- Summary Of Components; Removing And Installing The Fuel Distributor - Skoda Octavia III 2013 Workshop Manual

4.2

Fuel distributor MPI- summary of components

1 - Clamp
❑ for fuel pressure sender
for low-pressure - G410-
2 - O-ring
❑ replace after removal
3 - Adapter
❑ must be bolted to fuel
pressure sender for low-
pressure - G410-
-position 4-
❑ Replace O-ring after
disassembly
❑ 15 Nm
4 - Fuel pressure sender for
low-pressure - G410-
❑ must be bolted with
adapter -Pos. 3-
❑ Removing and installing
⇒ page 311
❑ 15 Nm
5 - Fuel distributor for injection
valve MPI
6 - Screw
❑ 9 Nm
7 - Fuel feed line
❑ for fuel distributor for in‐
jection valve MPI
❑ Install free of tension
(make sure it is clean)
8 - Clamp
9 - O-ring
❑ replace after removal
10 - Injector
❑ pay attention to correct installation position
❑ Removing and installing
11 - O-ring
❑ replace after removal
4.3 Removing and installing the fuel distrib‐
utor
Removing
Note
The work seizure applies to FSI fuel distributors
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
⇒ page 304
Octavia III 2013 ➤ , Octavia III 2014 ➤
299
4. Injection valves