Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– Turn the belt pulley in the running direction of the engine until
the piston of the chain tensioner in the
-direction of the arrow- extends to the maximum extent .
– Count visible piston teeth.
Note
Visible piston teeth are all the teeth to the right of the chain
♦
tensioner protection -arrow-.
If 7 or more teeth are visible: Replace camshaft timing shaft
♦
⇒ page 91
.
Note
If 6 or fewer teeth are visible, the timing belt may not be replaced.
– Replace screw plugs after disassembly
2.6
Checking valve timing
Special tools and workshop equipment required
♦ Adapter for dial gauge - T10170- or -T10170A-
♦ Dial gauge
♦ Caliper gauge
Test sequence
– Remove top cover for timing chain
– Remove the sound dampening system ⇒ Body Work; Rep.
gr. 66 .
– Rotate V-ribbed belt pulley crankshaft with the counterholder
- T10355- in direction of arrow until the marks -arrows- are
almost on top.
– Remove spark plug for cylinder 1.
106
Rep. gr.15 - Cylinder head, valve gear
⇒ page 82
.