Skoda Octavia III 2013 Workshop Manual page 42

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
❑ Tightening torque and tightening order
10 - Pendulum support
❑ removing and installing
11 - Screw
❑ replace after removal
❑ Tightening torque and tightening order
12 - Screw
❑ replace after removal
❑ Tightening torque and tightening order
13 - Screw
❑ Replace after disassembly
❑ 60 Nm + torque a further 90° (
14 - Screw
❑ Replace after disassembly
❑ 60 Nm + torque a further 90° (
15 - Gearbox mount
❑ with supporting arm
❑ removing and installing
16 - Screw
❑ Replace after disassembly
❑ 50 Nm + torque a further 90° (
17 - Gearbox support bracket
18 - Screw
❑ Tightening torque ⇒ Gearbox; Rep. gr. 34
19 - Screw
❑ Tightening torque ⇒ Gearbox; Rep. gr. 34
20 - Support
21 - Screw
❑ Tightening torque ⇒ Gearbox; Rep. gr. 34
Engine support bracket - tightening torque and tightening order
Note
Replace screws which have been tightened firmly to a torquing
angle.
– Tighten all bolts step by step in the given sequence:
Stage Screws
1. -1...3-
2. -1...3-
3. -1...3-
34
Rep. gr.10 - Removing and installing engine
⇒ page 35
⇒ page 40
⇒ page 35
⇒ page 35
1
/ 4 turn)
1
/ 4 turn)
⇒ page 38
1
/ 4 turn)
Tightening torque/torquing angle
7 Nm
40 Nm
90° (torque a further 90° (
1
/ 4 turn)