Skoda Octavia III 2013 Workshop Manual page 20

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– Drain coolant ⇒ page 182
– Remove the assembly carrier ⇒ Chassis; Rep. gr. 40 .
– Remove the front left and right wheelhouse liner ⇒ Body Work;
Rep. gr. 66 .
– Remove engine cover
– Remove air guide and air filter housing
– Undo screws on air guide right and left -arrow-.
– Unclip and remove the air guide pipe bottom - 1 -.
– Remove battery and battery tray ⇒ Electrical System; Rep.
gr. 27 .
– Disconnect vacuum hose -2-.
– Press the unlocking tool on the vacuum hose -1- and remove
the hose from the vacuum pump.
Note
Place a cloth under heating heat exchanger to absorb escaping
coolant.
– Raise holding clamps -arrows- and remove coolant hoses
from heat exchanger for heating.
– Hold the coolant hoses downwards and allow the coolant to
drain.
Vehicles with auxiliary heating
– Undo hose clamp -1-, raise holding clamps -arrows- and re‐
move the coolant hoses.
Continued for all vehicles
12
Rep. gr.10 - Removing and installing engine
.
⇒ page 10 .
⇒ page 288 .