Removing And Installing Oil Injection Nozzles - Skoda Octavia III 2013 Workshop Manual

– Using a plastic hammer, carefully knock against connecting
rod bearing cap in -direction of arrow- until it is loose.
5.5 Removing and installing oil injection
nozzles
Special tools and workshop equipment required
♦ Socket insert - Torx T40 - T10545-
Note
Remove the crankshaft before removing the oil spray jet for cyl‐
inder 4.
Removing
– Remove the sound dampening system ⇒ Body Work; Rep.
gr. 50 .
– Remove sump top part
– Rotate the crankshaft with the fixing screw of the vibration
damper in direction of engine rotation until it is possible to in‐
sert the socket insert - Torx T40 - T10545- with no effort into
the applicable valve.
– Loosen and remove the pressure relief valve -1-.
– Remove oil spray nozzles -2-.
Install
Installation is carried out in the reverse order.
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
⇒ page 162 .
Octavia III 2013 ➤ , Octavia III 2014 ➤
5. Pistons and connecting rods
79