– Release screws -arrows- and remove heat shield for right drive
shaft.
– Unscrew screw -arrow- and remove oil return line.
– Unplug connector -1-.
– Unscrew locknut -2- and unscrew operating lever.
– Release screws -arrows- and remove charge pressure regu‐
lator - V465- .
– Check the bypass valve -arrow- for smooth operation.
Note
If there is any resistance, replace the turbocharger
Install
Installation is carried out in the reverse order. However, pay at‐
tention to the following:
•
Tightening torques
⇒ page 260
– Screw in operating rod of the charge pressure regulator into
the joint element up to half of the threaded section.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
⇒ page 263
.
1. Exhaust gas turbocharger
267