Skoda Octavia III 2013 Workshop Manual page 24

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– Unplug connector -3-.
– Turn back gear lever boot for B+-pin -2- and unscrew B+-line
from magnet switch of the starter.
– Release nuts -4- and remove earth cable.
WARNING
Risk of destruction of the (mechatronics) control unit by elec‐
trostatic discharge.
♦ Do not allow the gearbox plug contacts to come into con‐
tact with your hands.
– Touch a conductive component with the hands (without
gloves) to discharge static electricity.
– Disconnect the plug -1- from the dual clutch gearbox mecha‐
tronics - J743- .
Vehicles with automatic transmission 0D9
– Remove selector lever linkage from gearbox and pull it out of
the linkage support ⇒ Gearbox; Rep. gr. 34 .
– Unplug connector -2-.
– Turn back gear lever boot for B+-pin -1- and unscrew B+-line
from magnet switch of the starter.
– Release nuts -3- and remove earth cable.
Note
The earth cable is secured to the starter bolt, depending on the
type.
WARNING
Risk of destruction of the (mechatronics) control unit by elec‐
trostatic discharge.
♦ Do not allow the gearbox plug contacts to come into con‐
tact with your hands.
– Touch a conductive component with the hands (without
gloves) to discharge static electricity.
– Turn the rotary lock in an anticlockwise direction and discon‐
nect the plug connection -4- for Mechatronics for double clutch
gearbox - J743- .
Continued for all vehicles
16
Rep. gr.10 - Removing and installing engine