Skoda Octavia III 2013 Workshop Manual page 267

– Connect the hand vacuum pump -V.A.S 6213- with adapter -
VAS 6550/3-2 - to the vent line as shown.
– Put the change-over ring -1- of the hand vacuum pump -V.A.S
6213- in position -A- for vacuum
– Operate the hand vacuum pump several times.
No vacuum should build up.
If a vacuum builds up.
– Check the ventilation opening -4- on the activated charcoal
filter -1- for dirt and clean as required.
– Check vent line from activated charcoal filter to engine for
clearance.
If no vacuum builds up:
– Seal connection of the activated charcoal filter -2- with a suit‐
able plug -1- from screw plug set for engine , e. g. -VAS 6122- .
– Operate the hand vacuum pump several times. A vacuum
should build up.
If no vacuum builds up:
– Renew activated charcoal filter
⇒ "4.2 Removing and installing activated charcoal filter", page
257 .
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
4. Activated charcoal filter system
259