Skoda Octavia III 2013 Workshop Manual page 105

– Install sliding rail -1- and tighten screws -arrows-.
– Attach the camshaft timing shaft with the marks -arrows- to the
camshaft journal.
– Place on the final drive chain for the oil pump onto the three-
stage sprocket.
– Turn the three-stage sprocket in -direction of arrow- to the en‐
gine and secure to the crankshaft. The marks -arrows- must
face each other.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
97
2. Chain drive