Skoda Octavia III 2013 Workshop Manual page 80

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– Remove screw -1- for balancing shaft for inlet camshaft and
remove the balancing shaft.
Install
• Tightening torques ⇒ page 67
– Check the installation position of the pipe for the balancing
shaft; the bores -arrow- must face the chain side.
– Wet bearing of the balancing shaft -arrows- with engine oil.
– Install the balancing shaft for the exhaust camshaft.
72
Rep. gr.13 - Crankshaft group