Skoda Octavia III 2013 Workshop Manual page 106

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– I. Screw in assembly tool - T10531/2- into crankshaft. Tighten
screw until hand-tight.
– II. Fit assembly tool - T10531/3- with assembly tool -
T10531/4- and screw in until hand tight. Use wrench SW 32 to
check whether the sprocket is seated securely in the serration
of the crankshaft. Tighten the screw -A-.
– Position the coloured chain link of the balancing shaft timing
chain -arrow- on the mark of the three-stage sprocket; install
the tensioning rail -1- and sliding rail -2- for the timing chain
and tighten the screw -3-.
– Install the chain tensioner for timing chain -1-.
– Check the setting again; the coloured chain links -arrows-
must be at the markings of the chain sprockets.
98
Rep. gr.15 - Cylinder head, valve gear