Skoda Octavia III 2013 Workshop Manual page 162

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– Pull off valve stem seals with extractor - MP1-230 (3364)- .
Install the valve stem seal
WARNING
Risk of damage to the valve stem seals during installation.
♦ Fit the plastic bushing -A-, which is attached to the new
valve stem seals -B-, onto the valve stem.
– Lightly oil sealing lip of the valve stem seal.
– Slide the valve stem seal onto the plastic bushing.
– Carefully press the valve stem seal with the valve stem seal
insertion tool - MP1-233 (3365)- onto the valve guide.
– Remove plastic sleeve.
– Insert the valve spring and the valve spring retainer.
– Install the disassembly and assembly device for valve collets
- VAS 5161- as shown.
Inlet side
154
Rep. gr.15 - Cylinder head, valve gear