Replacing Middle Or Rear Part Of The Exhaust System - Skoda Octavia III 2013 Workshop Manual

1 - Open warm-type clamp
❑ align exhaust system
free of stress before
tightening ⇒ page 339
❑ Fitting position
⇒ page 328
❑ Tighten bolted connec‐
tions evenly
❑ 23 Nm
2 - Support
3 - Screw
❑ 20 Nm
4 - Retaining strap
❑ replace if damaged
5 - Middle and rear silencer
❑ only supplied as com‐
plete assembly ⇒ ETKA
- Electronic Catalogue
of Original Parts
❑ fitting on the exhaust
system free of stress
⇒ page 339
6 - Support
7 - Screw
❑ 20 Nm
8 - Retaining strap
❑ replace if damaged
1.6 Replacing middle or rear part of the ex‐
haust system
For vehicles with front-wheel drive and engine identification char‐
acters CJSA
Special tools and workshop equipment required
♦ Body saw e.g. -V.A.G 1523/A-
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
1. Removing and installing parts of the exhaust system
335