Skoda Octavia III 2013 Workshop Manual page 130

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
❑ Removing and installing as of 07.2013
❑ Slack: max. 0.04 mm
16 - Fit pin
17 - Fit pin
18 - Inlet valve
❑ do not rework, only grinding in is permissible
❑ valve dimensions
❑ inspecting valve guides
Undo screws for cylinder head cover
– Loosen screws for camshaft housing in the sequence
-1 ... 6-.
Cylinder head cover - tightening sequence
– Replace screws after disassembly
Note
Make sure that the cylinder head cover is not tilted.
1. Turn in new screws in the sequence -1...6- in several stages
until hand-tight.
2. Tighten the bolts in the sequence -1...6- to 8 Nm.
3.
Turn screws further in the sequence -1 ... 6- by 90° (
turn).
122
Rep. gr.15 - Cylinder head, valve gear
⇒ page 135
⇒ page 156
⇒ page 155
1
/ 4