Fuel Containers For Vehicles With All-Wheel Drive - Summary Of Components - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
1.2

Fuel containers for vehicles with all-wheel drive - Summary of components

1 - Screw
❑ Replace after disas‐
sembly
❑ 20 Nm + torque a further
1
90° ( / 4 turn)
2 - Fuel line
❑ Vehicles with auxiliary
heating, the auxiliary
heating from the dosing
pump
❑ do not kink
❑ disconnect and connect
⇒ page 250
3 - Fuel feed line
❑ to the engine
❑ pushed into the fuel tank
❑ do not kink
❑ disconnect and connect
⇒ page 250
4 - Vent line
❑ For solenoid valve 1 for
activated charcoal filter -
N80-
❑ pushed into the fuel tank
❑ do not kink
❑ disconnect and connect
⇒ page 250
5 - Fuel pump control unit -
J538-
❑ Removing and installing
⇒ page 248
6 - Screw
❑ Replace after disassembly
❑ 8 Nm + torque a further 90° (
7 - Screw cap
❑ screw in until there is an audible click
❑ with securing to prevent any loss during tank fuel filler flap operation
8 - Screw
❑ for attaching the fuel filler neck
❑ for discharging the electrostatic charge
❑ replace after removal
❑ 8 Nm + torque a further 90° (
9 - Earth connection
❑ for fuel filler neck
❑ for discharging the electrostatic charge
10 - Vent line
❑ to the activated charcoal filter system
❑ pushed into the fuel tank
220
Rep. gr.20 - Fuel supply system
1
/ 4 turn)
⇒ page 219
1
/ 4 turn)
⇒ page 219