Skoda Octavia III 2013 Workshop Manual page 142

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– Turn exhaust camshaft with assembly tool - T40266- in
-direction of arrow 1- and move camshaft clamp - T40271/1-
out of the teething of the chain sprocket in
-direction of arrow 2- and release the camshaft.
– Insert the tensioning rail -2- upwards and screw in the screw
-1-.
– Turn inlet camshaft with assembly tool - T40266- in
-direction of arrow 1- and move camshaft clamp - T40271/2-
out of the teething of the chain sprocket in
-direction of arrow 2- and release the camshaft.
– Check the control times, the marks on the camshaft timing
shaft and on the cylinder head -arrows- must coincide with the
marks on the chain sprockets.
• The markings on the camshaft timing shaft and the guide rail
of the camshaft timing shaft -2- must face each other.
• The notch on the V-ribbed belt pulley must face the arrow
marking on the bottom cover for the timing chain -3-.
134
Rep. gr.15 - Cylinder head, valve gear