Skoda Octavia III 2013 Workshop Manual page 153

A second mechanic is needed for the following work step.
I - Lightly turn exhaust camshaft with assembly tool - T40266- in
direction of arrow -A- and push camshaft clamp - T40271/1- out
of the serration of the chain sprocket -B- .
II - Turn camshaft lightly in direction of arrow -C- until the timing
chain rests against the sliding rail -1-. Install sliding rail -2- in this
position and tighten the screw -3-.
– Turn inlet camshaft with assembly tool - T40266- in
-direction of arrow 1- and push camshaft clamp - T40271/2-
out of the serration of the chain sprocket in
-direction of arrow 2- . Relieve camshaft and remove camshaft
clamp - T40271/1- and camshaft clamp - T40271/2- .
– Screw in and tighten the screws -arrows-.
– Fit bearing cover and screw in screws -arrows- hand-tight.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
145
4. Valve gear