Skoda Octavia III 2013 Workshop Manual page 255

– Open shut-off taps -A and B-.
• The levers are housed in the flow direction.
– Removing rear seat bench ⇒ Body Work; Rep. gr. 72 .
– Loosen catch pegs -arrows- of the cover -1- with disassembly
wedge - 3409- and remove the cover.
– Disconnect plug connection -1- at the closing flange.
Note
Do not pay attention to the position -2-.
– Connect the remote control for the V.A.G 1348 - V.A.G 1348/3-
to the connector and to the fuel pump.
– Connect remote control - V.A.G 1348/3A- with adapter line -
V.A.G 1348/3-3- and with the line from the measuring tool set
- V.A.G 1594/C- to contact -1-.
– Mask second plug contact of the adapter - V.A.G 1348/3-3-
with short-circuit proof tape -arrow-.
– Connect contact -5- with line of auxiliary measuring set - V.A.G
1594/C- to body mass -A-.
– Connect alligator clip to the positive terminal "+" -B-.
Note
Primary pressure must be built up against which the fuel pump
must work when the fuel delivery flow in the fuel line is being
measured. This primary pressure is set as follows using pressure
gauge VAS 6550:
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
247
1. Fuel tank