Install the valve stem seal
WARNING
Risk of damage to the valve stem seals during installation.
♦ Fit the plastic bushing -A-, which is attached to the new
valve stem seals -B-, onto the valve stem.
– Lightly oil sealing lip of the valve stem seal.
– Slide the valve stem seal onto the plastic bushing.
– Carefully press the valve stem seal with the valve stem seal
insertion tool - 3365- onto the valve guide.
– Remove plastic sleeve.
– Insert the valve spring and the valve spring retainer.
– Install the disassembly and assembly device - VAS 5161- as
shown.
Inlet side
Outlet side
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
151
4. Valve gear