Skoda Octavia III 2013 Workshop Manual page 157

– If necessary, align the guide plate for FSI engine - VAS
5161/19C- -arrow- so that the guide plate is in contact with the
cylinder head and the guide pin -1- is free.
– Screw on guide plate for the FSI engine - VAS 5161/19C- with
knurled screws - VAS 5161/12- onto the cylinder head as
shown.
– Position piston of the relevant cylinder to "dead centre".
– Screw the adapter - T40012- in the spark plug thread.
– Connect compressed air source with compressed air of min.
0.6 MPa (6 bar).
– Undo the fixed valve collets with impact drift - VAS 5161/3-
and plastic hammer.
For inlet side
– Screw in detent part - VAS 5161/6- with interlocking fork - VAS
5161/5- into the middle threaded bore on the guide plate for
the FSI engine - VAS 5161/19C- .
– Insert assembly cartridge - VAS 5161/8- into the guide plate
for the FSI engine - VAS 5161/19C- .
– Hook pressure fork - VAS 5161/2- into the detent part - VAS
5161/6- .
For exhaust side
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
149
4. Valve gear