Skoda Octavia III 2013 Workshop Manual page 134

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– Use the assembly device - T10352/2- to remove the left and
right control valve in -direction of arrow-.
– Screw out screws -arrows- and screws arrows and remove
engine cap.
– Rotate the V-ribbed belt pulley with counterholder - T10355-
into the "TDC" position.
• The notch on the V-ribbed belt pulley and the marking for the
bottom cover for timing chain must be opposite each other
-arrow-
• Markings -1- of the camshaft chain sprocket must lie opposite
to markings -2 and 3- on the cylinder head
– The mutual position of the camshaft timing shaft/cylinder head
-arrows- for the marks on the chain sprockets -1- with a water-
proof felt-tip pen.
126
Rep. gr.15 - Cylinder head, valve gear