Skoda Octavia III 2013 Workshop Manual page 141

– Turn the inlet camshaft in -direction of arrow 1- until the mark
-3- coincides with the camshaft clamp - T40271/2- .
– Move camshaft clamp - T40271/2- into the serration of the
chain sprocket in -direction of arrow 2-.
– Turn the inlet camshaft in -direction of arrow 1- until the mark
-3- coincides with the camshaft clamp - T40271/1- .
– Move camshaft clamp - T40271/1- into the serration of the
chain sprocket in -direction of arrow 2-.
– Rotate the V-ribbed belt pulley with counterholder - T10355-
into the "TDC" position.
• The notch on the V-ribbed belt pulley and the marking for the
bottom cover for timing chain must be opposite each other
-arrow-
– Place the camshaft timing shaft into position; do so by posi‐
tioning the marks on the chain links -arrows- into the right
position vis-a-vis the chain sprockets -1-.
– Install top guide rail -2-.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015