Skoda Octavia III 2013 Workshop Manual page 60

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– Turn the crankshaft on the hexagon-arrow-.
Install
– Where necessary, remove the assembly tool - T10531/3- and
assembly tool - T10531/4- from the assembly tool - T10531/2- .
– Put the V-ribbed belt pulley crankshaft into the TCD position,
note the tooth contour of the chain wheel -arrow-.
– Fit the assembly tool - T10531/3- onto the assembly tool -
T10531/2- with the hexagon to the belt pulley and screw in the
assembly tool - T10531/4- lightly. Check whether the belt pul‐
ley sits in the tooth contour and tighten the assembly tool -
T10531/4- .
52
Rep. gr.13 - Crankshaft group