Skoda Octavia III 2013 Workshop Manual page 247

– Pull the fuel lines out of the fuel tank opening.
– Press the unlocking on the connecting piece and remove fuel
feed lines -1 and 2- .
Install
Further installation occurs in reverse order. However, pay atten‐
tion to the following:
♦ Replace gasket ring.
♦ Make sure the hoses fit tightly.
♦ When connecting the connectors, make sure the locking is
correct.
– Insert the new dry gasket ring into the opening of the fuel tank
and moisten only from the inside with fuel for installing the
closing flange.
Caution
Risk of leakage.
The gasket ring must not get damaged or squashed when in‐
serting the sealing flange.
– Insert the fuel delivery unit into the fuel tank in such a way that
the float arm of the sender for the fuel gauge display - G- is
not bent.
– Press down the closing flange against the spring force and
bring it into the installation position.
• Clutch -2- on closing flange must point to opening -arrow- on
the lock ring and be located between tabs -3 and 4- on the fuel
tank.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015