Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
2
Charge air system with exhaust gas
turbocharger
⇒ "2.1 Charge air cooling - Summary of components",
page 270
⇒ "2.2 Removing and installing charge air cooler", page 272
⇒ "2.3 Removing and installing charge pressure sender G31 ",
page 273
⇒ "2.4 Checking the charge-air system for leaktightness",
page 273
Observe the general notes for assembly work on the charge air
system with exhaust gas turbocharger
2.1
Charge air cooling - Summary of components
Note
Before an inspection or a repair, check all the air guide pipes and air guide hoses as well as vacuum lines
♦
for tight connection and leaktightness.
Observe rules for cleanliness
♦
The radiator, capacitor and charge air cooler may have minor indentations on the fins, even if assembly is
♦
correct. This is not a case of damage. Radiator, capacitors or charge air cooler must not be replaced because
of these indentations.
270
Rep. gr.21 - Turbocharging/supercharging
⇒ page 7
.
⇒ page 9
.