Skoda Octavia III 2013 Workshop Manual page 169

– Remove the spring on the chain tensioner with the assembly
device - T10118- in -direction of arrow- and secure with the
extractor - T40265- .
– Release screws -arrows- and remove oil pump.
Install
Installation is carried out in the reverse order. However, pay at‐
tention to the following:
– Check whether both dowel sleeves are present for centering
the oil pump.
– Before installing the oil pump, check the sieve in the suction
line and the oil channels in the upper part of the oil sump for
dirt.
– Place the chain sprocket of the oil pump into the final drive
chain, and install the oil pump.
WARNING
Risk of destruction of the engine.
♦ The following work step must be followed, otherwise the
spring of the chain tensioner will not jump into the fitting
position.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
161
1. Sump, oil pump