Show Mac-Address-Table Static - D-Link DES-7200 Cli Reference Manual

Chapter 14 MAC Address Configuration Commands
Related
commands
14.2.8

show mac-address-table static

Use this command to show the static MAC address.
show mac-address-table static [addr mac-addr] [interface interface-id] [vlan vlan-id ]
Parameter
description
Command
mode
Examples
Related
14-20
--------- --------------
GigabitEthernet1/14
DES-7210# show mac-address-table notification
MAC Notification Feature: Disabled
Interval between Notification Traps: 1 secs
Maximum Number of entries configured in History Table:1
Current History Table Length: 0
DES-7210# show mac-address-table notification history
History Index: 0
MAC Changed Message:
Operation:ADD Vlan: 1 MAC Addr: 00f8.d012.3456 GigabitEthernet 3/1
Command
mac-address-table
notification
snmp trap
mac-notification
Parameter
mac-addr
vlan-id
interface-id
Privileged mode.
Show only static MAC addresses
DES-7210# show mac-address-table static
Vlan MAC Address
---------- -------------------- -------- ---------
1 00d0.f800.1001
1 00d0.f800.1002
1 00d0.f800.1003
Command
DES-7200 CLI Reference Guide
--------------
Disabled Disabled
Description
Enable MAC address notification.
Enable the
notification function on the specified
interface.
Description
Destination MAC address of the entry
VLAN ID of the entry
Interface of the entry (physical interface
or aggregate port)
Type Interface
STATIC gigabitethernet 1/1
STATIC gigabitethernet 1/1
STATIC gigabitethernet 1/1
Description
MAC address trap