Deny; Permit - D-Link DES-7200 Cli Reference Manual

Chapter 16 IGMP Snooping Configuration Commands

ip igmp snooping vlan mdevice learn pim-dvmrp

ip igmp snooping vlan static interface
16.1.1

deny

To deny the forwarding of the multicast streams in the range specified by the profile,
execute the deny configuration command in the profile configuration mode.
deny
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
commands
16.1.2

permit

To permit the forwarding of the multicast streams in the range specified by the profile,
execute the permit command in the profile configuration mode. In this way, the interface
associated with this profile will forward the specified multicast stream only.
permit
16-2
N/A
The forwarding of the multicast streams in the range specified by the
profile is denied.
Profile configuration mode.
First, configure the multicast range using the range command in the
profile configuration mode. In addition, the profile must be applied to
the interface in order to make the profile configuration take effect.
The following is an example of deny the forwarding of the multicast
stream 224.2.2.2:
DES-7210(config)# ip igmp profile 1
DES-7210(config-profile)# range 224.2.2.2
DES-7210(config-profile)# deny
Command
ip igmp profile
range
DES-7200 CLI Reference Guide
Description
Create a profile.
Configure the multicast address range.