DES-7200 CLI Reference Guide
Related
commands
15.1.7
ip dhcp snooping database write-to-flash
Use this command to write the dynamic user information of the DHCP binding database into
flash in real time.
ip dhcp snooping database write-to-flash
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
commands
15.2
DHCP snooping Interface Mode Commands
There are several commands under the DHCP snooping interface mode as follows:
ip dhcp snooping suppression
ip dhcp snooping trust
Chapter 15 DHCP Snooping Configuration Commands
Interface
Trusted
------------------------
Command
show ip dhcp
snooping
N/A.
N/A.
Global configuration mode.
Use this command to write the dynamic user information of the DHCP
binding database into flash in real time.
The following is an example of writing the dynamic user information of
the DHCP binding database into flash.
DES-7210# configure terminal
DES-7210(config)# ip dhcp snooping database write-to-flash
DES-7210(config)# end
DES-7210#
N/A.
Rate limit (pps)
-------
---------------
Description
View the configuration information of the
DHCP snooping.
15-7