Show Command Logging - D-Link xStack Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Format
disable command logging
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disable the command logging:
DGS-3120-24TC:admin# disable command logging
Command: disable command logging
Success.
DGS-3120-24TC:admin#
15-3

show command logging

Description
This command is used to display the Switch's general command logging configuration status.
Format
show command logging
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To show the command logging configuration status:
DGS-3120-24TC:admin# show command logging
Command: show command logging
Command Logging State : Disabled
DGS-3120-24TC:admin#
179