Ip Igmp Snooping Vlan Static Interface - D-Link DES-7200 Cli Reference Manual

Chapter 16 IGMP Snooping Configuration Commands
Related
commands

16.1.21 ip igmp snooping vlan static interface

Once IGMP snooping is enabled, a port can receive a certain multicast frame without being
afftected by various IGMP messges by executing the ip igmp snooping vlan static
interface command in the global configuration mode. The no form of this command is used
to delete a static configuration.
ip igmp snooping vlan vid static ip-addr interface interface-id
no ip igmp snooping vlan vid static ip-addr interface interface-id
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
commands
16-18
routing interface learning function on the equipment:
DES-7210(config)# ip igmp snooping vlan 1 mdevice learn pim-dvmrp
Command
ip igmp snooping vlan
vid mdevice learn
pim-dvmrp
Parameter
vid
ip-addr
interface-id
N/A.
Global configuration mode.
Multiple multicast IP addresses can be configured for an interface.
The following example demonstrates how to configure a static
multicast address on a port:
DES-7210(config)# ip igmp snooping vlan 1 static 224.0.0.2 interface
fastEthernet 0/1
Command
ip igmp snooping vlan
mdevice interface
DES-7200 CLI Reference Guide
Description
Enable the dynamic routing
interface learning function on
the multicast routing port.
Description
VLAN ID of a routing interface
Multicast IP address
Interface ID
Description
Configure a multicast routing
interface