Show Ip Dhcp Snooping Binding - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
show ip dhcp snooping
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
commands
15.3.2

show ip dhcp snooping binding

Use this command to view the information of the DHCP snooping binding database.
show ip dhcp snooping binding
Chapter 15 DHCP Snooping Configuration Commands
N/A.
N/A.
Privileged EXEC mode.
N/A.
Show the information of DHCP Snooping.
DES-7210# show ip dhcp snooping
Switch DHCP snooping status ：ENABLE
Verification of hwaddr field status ：DISABLE
DHCP snooping database write-delay time: 0 seconds
DHCP snooping option 82 status: ENABLE
DHCP snooping Support Bootp bind status: ENABLE
Interface
------------------------
Command
ip dhcp snooping
ip dhcp snooping verify
mac-address
ip dhcp snooping
write-delay
ip dhcp snooping
information option
ip dhcp snoooping
bootp-bind
ip dhcp snooping trust
Trusted Rate limit (pps)
------- ------------
Description
Enable the DHCP snooping globally.
Enable the check of source MAC
address of DHCP Snooping packets.
Set the interval
information to FLASH periodically.
Add option82 to the DHCP request
message.
Enable the DHCP snooping bootp bind
function.
Set the port as a trust port.
of writing user
15-11