Display Rmon Eventlog - Huawei Quidway S2000 Series Command Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches
HUAWEI
VALID
Description
Will cause log-trap when triggered, last triggered at
0days 00h:02m:27s

6.1.3 display rmon eventlog

Syntax
display rmon eventlog [ event-number ]
View
Any view
Parameter
event-number: Entry index of event table.
Description
Using display rmon eventlog command, you can view RMON event log.
The display includes description about event index in event table, description to the
event, and occurrence time of the latest event (counted on system initiate/boot time in
centisecond).
Example
# Show event log of RMON.
<Quidway> display rmon eventlog 1
Event table 1 owned by HUAWEI is VALID.
Generates eventLog 1.1 at 0days 00h:01m:39s.
Description: The 1.3.6.1.2.1.16.1.1.1.4.1 defined in alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Generates eventLog 1.2 at 0days 00h:02m:27s.
Description: The alarm formula defined in private alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Table 6-3 Output description of the display rmon eventlog command
Event table 1
Field
Field
6-3
Chapter 6 RMON Configuration Commands
Description
Owner
The entry corresponding to the index is valid
Event description
When the event is triggered, it will cause the log-trap.
And the last triggered time is 00h:02m:27s
Description
Index 1 in event table