Lifting And Jacking The Vehicle - Suzuki XL7 2007 Service Manual

Hide thumbs Also See for XL7 2007:

Table of Contents

Lifting and Jacking the Vehicle

To avoid any vehicle damage, serious personal injury or death when major components are removed

from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the

opposite end from which the components are being removed and strap the vehicle to the hoist.

To avoid any vehicle damage, serious personal injury or death, always use the jackstands to support

the vehicle when lifting the vehicle with a jack.

Perform the following steps before beginning any vehicle lifting or jacking procedure:

• Remove or secure all of the vehicle's contents in order to avoid any shifting or any movement that

may occur during the vehicle lifting or jacking procedure.

• The lifting equipment or the jacking equipment weight rating must meet or exceed the weight of the

vehicle and any vehicle contents.

• The lifting equipment or the jacking equipment must meet the operational standards of the lifting

equipment or jacking equipment's manufacturer.

• Perform the vehicle lifting or jacking procedure on a clean, hard, dry, level surface.

• Perform the vehicle lifting or jacking procedure only at the identified lift points. DO NOT allow the

lifting equipment or jacking equipment to contact any other vehicle components.

Failure to perform the previous steps could result in damage to the lifting equipment or the jacking

equipment, the vehicle, and/or the vehicle's contents.

General Information: